protocol.be

Connect through telnet or ssh:

Resumed:

enable
config
interface gpon 0/1
ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120
ont port native-vlan 15 8 eth 1 vlan 120 priority 0
quit
service-port vlan 120 gpon 0/1/15 ont 8 gemport 0 multi-service user-vlan 120 tag-transform
quit
save


Detailed:

MA5800-X2>enable
MA5800-X2#config
MA5800-X2(config)#display ont autofind all 
{ <cr>||<K> }: 

  Command:
          display ont autofind all
   ----------------------------------------------------------------------------
   Number              : 1
   F/S/P               : 0/1/15
   Ont SN              : 50524B5300C18136 (PRKS-00C18136)
   Password            : 0x31323334353637380000(12345678)
   Loid                : 123456789
   Checkcode           : 123456
   VendorID            : PRKS
   Ont Version         : V1.0
   Ont SoftwareVersion : SFUV1.1.8
   Ont EquipmentID     : FiberLink101
   Ont Customized Info : -
   Ont MAC             : -
   Ont Equipment SN    : -
   Ont autofind time   : 2026-01-18 11:03:51+08:00
   Multi channel       : -
   ----------------------------------------------------------------------------

MA5800-X2(config)#interface gpon 0/1
MA5800-X2(config-if-gpon-0/1)#ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120      
{ <cr>|access-scenario<K>|desc<K>|fiber-route<K>|ont-type<K>|tcont-group<K> }: 

  Command:
          ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120
  Number of ONTs that can be added: 1, success: 1
  PortID :15, ONTID :8

MA5800-X2(config-if-gpon-0/1)#ont port native-vlan 15 8 eth 1 vlan 120 priority 0
{ <cr>|nni-tpid-index<K>|uni-tpid-index<K> }: 

  Command:
          ont port native-vlan 15 8 eth 1 vlan 120 priority 0


MA5800-X2(config-if-gpon-0/1)#quit
MA5800-X2(config)#service-port vlan 120 gpon 0/1/15 ont 8 gemport 0 multi-service user-vlan 120 tag-transform translate
MA5800-X2(config)#quit
MA5800-X2#save

for i in $(seq  459 510); do echo -e "undo service-port $i\n"; done

ont delete 6 all

cut -d "," pon7.csv -f1,3 | sed -e "s/,/ /" >> p7

while IFS=' ' read -r id serial; do echo -ne 'ont add 6 '$id' sn-auth "'$serial'" omci ont-lineprofile-id 301 ont-srvprofile-id 301\n\n'; done < p7

while IFS=' ' read -r id serial; do echo -ne "ont port native-vlan 6 $id eth 1 vlan 301 priority 0\n\n"; done < p7

while IFS=' ' read -r id serial; do echo -ne "service-port vlan 301 gpon 0/1/6 ont $id gemport 0 multi-service user-vlan 301 tag-transform translate\n\n"; done < p7

sed -e 's/0\/2/0\/1/' huawei.txt | sed -e 's/sleep=8/\n/' | sed -e 's/quit/\nquit\n/' | sed -e 's/None//'

or

cut -d "/" -f3- chima5.csv | cut -d "," -f0-2| sed -e 's/,/ /'> chima5