protocol.be

This is an old revision of the document!

---

telnet/ssh

enable
config
interface gpon 0/1
ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120
ont port native-vlan 15 8 eth 1 vlan 120 priority 0
quit
service-port vlan 120 gpon 0/1/15 ont 8 gemport 0 multi-service user-vlan 120 tag-transform translate
quit
save

mass remove

for i in $(seq  459 510); do echo -e "undo service-port $i\n"; done

ont delete 6 all

mass add from cdata

cut -d "," pon7.csv -f1,3 | sed -e "s/,/ /" >> p7

while IFS=' ' read -r id serial; do echo -ne 'ont add 6 '$id' sn-auth "'$serial'" omci ont-lineprofile-id 301 ont-srvprofile-id 301\n\n'; done < p7

while IFS=' ' read -r id serial; do echo -ne "ont port native-vlan 6 $id eth 1 vlan 301 priority 0\n\n"; done < p7

while IFS=' ' read -r id serial; do echo -ne "service-port vlan 301 gpon 0/1/6 ont $id gemport 0 multi-service user-vlan 301 tag-transform translate\n\n"; done < p7

mass add from chima through SGP

sed -e 's/0\/2/0\/1/' huawei.txt | sed -e 's/sleep=8/\n/' | sed -e 's/quit/\nquit\n/' | sed -e 's/None//'

or

cut -d "/" -f3- chima5.csv | cut -d "," -f0-2| sed -e 's/,/ /'> chima5