Differences

This shows you the differences between two versions of the page.

--- huawei [2026/01/19 12:07] – protocol
+++ huawei [2026/02/06 09:35] (current) – [PON name] protocol
@@ Line 1: / Line 1: @@
-telnet/ssh
+===== Provision ONU/ONT =====
-<code>
+Connect through telnet or ssh:
-Resumido:
+Resumed:
+<code>
 enable
 config
@@ Line 13: / Line 14: @@
 quit
 save
+</code>
+Detailed:
+<code>
-Detalhado:
 MA5800-X2>enable
 MA5800-X2#config
@@ Line 67: / Line 67: @@
 </code>
-mass remove
+===== Mass remove =====
 <code>
@@ Line 76: / Line 77: @@
 </code>
-mass add from cdata
+===== Mass add from cdata =====
 <code>
@@ Line 89: / Line 90: @@
 </code>
-mass add from chima through SGP
+===== Mass add from chima through SGP =====
 <code>
@@ Line 97: / Line 98: @@
 cut -d "/" -f3- chima5.csv | cut -d "," -f0-2| sed -e 's/,/ /'> chima5
+</code>
+===== Mass add from Parks =====
+<code>
+grep -A1 bridge pon0 | grep alias | cut -d " " -f 3,5
+while IFS=' ' read -r serial pppoe; do echo -ne "ont add 0 sn-auth \"${serial^^}\" omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc \"$pppoe\" \n\n\n"; done < p0
+for i in $(seq 0 12); do echo -e "ont port native-vlan 0 $i eth 1 vlan 10 priority 0\n";done
+for i in $(seq 0 12); do echo -e "service-port vlan 10 gpon 0/1/0 ont $i gemport 0 multi-service user-vlan 10 tag-transform translate\n";done
+grep -B3 router | grep alias | cut -d " " -f 3,5 > p0r
+while IFS=' ' read -r serial pppoe; do echo -ne "ont add 0 sn-auth \"${serial^^}\" omci ont-lineprofile-id 120 ont-srvprofile-id 120 desc \"$pppoe\" \n\n\n"; done < p0r
+for i in $(seq 13 57); do echo -e " service-port vlan 120 gpon 0/1/0 ont $i gemport 0 multi-service user-vlan 120 tag-transform translate\n";done
+</code>
+===== PON name =====
+<code>
+Comment on PON:
+config
+ port desc 0/1/0 description "TEST"
+quit
+save
+Show unprovisioned:
+display ont info summary 0/1/0
+SNMP:
+snmp-agent community read cipher
 </code>