Differences

This shows you the differences between two versions of the page.

--- huawei [2025/11/15 03:36] – protocol
+++ huawei [2026/02/06 09:35] (current) – [PON name] protocol
@@ Line 1: / Line 1: @@
-mass remove
+===== Provision ONU/ONT =====
+Connect through telnet or ssh:
+Resumed:
+<code>
+enable
+config
+interface gpon 0/1
+ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120
+ont port native-vlan 15 8 eth 1 vlan 120 priority 0
+quit
+service-port vlan 120 gpon 0/1/15 ont 8 gemport 0 multi-service user-vlan 120 tag-transform
+quit
+save
+</code>
+Detailed:
+<code>
+MA5800-X2>enable
+MA5800-X2#config
+MA5800-X2(config)#display ont autofind all
+{ <cr>||<K> }:
+  Command:
+          display ont autofind all
+   ----------------------------------------------------------------------------
+   Number              : 1
+   F/S/P               : 0/1/15
+   Ont SN              : 50524B5300C18136 (PRKS-00C18136)
+   Password            : 0x31323334353637380000(12345678)
+   Loid                : 123456789
+   Checkcode           : 123456
+   VendorID            : PRKS
+   Ont Version         : V1.0
+   Ont SoftwareVersion : SFUV1.1.8
+   Ont EquipmentID     : FiberLink101
+   Ont Customized Info : -
+   Ont MAC             : -
+   Ont Equipment SN    : -
+   Ont autofind time   : 2026-01-18 11:03:51+08:00
+   Multi channel       : -
+   ----------------------------------------------------------------------------
+MA5800-X2(config)#interface gpon 0/1
+MA5800-X2(config-if-gpon-0/1)#ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120
+{ <cr>|access-scenario<K>|desc<K>|fiber-route<K>|ont-type<K>|tcont-group<K> }:
+  Command:
+          ont add 15 sn-auth PRKS-00C18136 omci ont-lineprofile-id 120 ont-srvprofile-id 120
+  Number of ONTs that can be added: 1, success: 1
+  PortID :15, ONTID :8
+MA5800-X2(config-if-gpon-0/1)#ont port native-vlan 15 8 eth 1 vlan 120 priority 0
+{ <cr>|nni-tpid-index<K>|uni-tpid-index<K> }:
+  Command:
+          ont port native-vlan 15 8 eth 1 vlan 120 priority 0
+MA5800-X2(config-if-gpon-0/1)#quit
+MA5800-X2(config)#service-port vlan 120 gpon 0/1/15 ont 8 gemport 0 multi-service user-vlan 120 tag-transform translate
+MA5800-X2(config)#quit
+MA5800-X2#save
+</code>
+===== Mass remove =====
 <code>
@@ Line 8: / Line 77: @@
 </code>
-mass add from cdata
+===== Mass add from cdata =====
 <code>
@@ Line 21: / Line 90: @@
 </code>
-mass add from chima through SGP
+===== Mass add from chima through SGP =====
 <code>
@@ Line 29: / Line 98: @@
 cut -d "/" -f3- chima5.csv | cut -d "," -f0-2| sed -e 's/,/ /'> chima5
+</code>
+===== Mass add from Parks =====
+<code>
+grep -A1 bridge pon0 | grep alias | cut -d " " -f 3,5
+while IFS=' ' read -r serial pppoe; do echo -ne "ont add 0 sn-auth \"${serial^^}\" omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc \"$pppoe\" \n\n\n"; done < p0
+for i in $(seq 0 12); do echo -e "ont port native-vlan 0 $i eth 1 vlan 10 priority 0\n";done
+for i in $(seq 0 12); do echo -e "service-port vlan 10 gpon 0/1/0 ont $i gemport 0 multi-service user-vlan 10 tag-transform translate\n";done
+grep -B3 router | grep alias | cut -d " " -f 3,5 > p0r
+while IFS=' ' read -r serial pppoe; do echo -ne "ont add 0 sn-auth \"${serial^^}\" omci ont-lineprofile-id 120 ont-srvprofile-id 120 desc \"$pppoe\" \n\n\n"; done < p0r
+for i in $(seq 13 57); do echo -e " service-port vlan 120 gpon 0/1/0 ont $i gemport 0 multi-service user-vlan 120 tag-transform translate\n";done
+</code>
+===== PON name =====
+<code>
+Comment on PON:
+config
+ port desc 0/1/0 description "TEST"
+quit
+save
+Show unprovisioned:
+display ont info summary 0/1/0
+SNMP:
+snmp-agent community read cipher
 </code>